We represent the following RF, Microwave and Millimeter Wave
component and system manufacturers in the Southeastern United States.
Click on a logo below to hyperlink
directly to the manufacturer's website.
For an electronic copy of our line card, please select the state
where you are located.
|
 |
Absolute EMC is a North American company
specializing in EMC testing knowledge and equipment. They offer
consulting services for the use of all EMC & RF test equipment,
including standards training, equipment training, and system
building, with extensive background knowledge of all brands and
available technologies. |
|
 |
AE Techron is a recognized world leader in the design and
manufacture of precision, audio bandwidth industrial power
amplifiers and EMC product safety compliance test systems. They
provide comprehensive solutions for power quality, conducted
immunity, and induced susceptibility testing for Automotive,
Aviation, and Telecom industries. With a focus on modular testing
systems and configurable amplifier solutions for difficult
requirements, AE Techron consistently meets the challenges of
the EMC industry with innovative design and exacting performance. |
|
 |
AR Modular RF offers amplifier systems for military,
government, medical, scientific, communications and industrial
applications, from 5 to 5,000 Watts and 0.01 to 6,000 MHz. Amplifier
modules covering a wide range of communication frequencies from LF
to SHF microwave bands, from 2 - 500 Watts and 0.01 - 6000 MHz. |
|
 |
Ardent Concepts is a maker of
high-performance, electronic interface products for the
Semiconductor, Computing, Communications, and Defense industries.
Their products provide exceptional signal integrity and design
flexibility in a cost-effective package. Ardent applies their
patented technologies to offer 3 primary solution types: Custom
connectors, test sockets, and COTS products, including 50GHz+ TR
multicoax that delivers the highest signal integrity with the
highest channel density and smallest board footprint on the market. |
|
 |
Berkeley Nucleonics Corporation (BNC), an
instrumentation manufacturer founded in 1963, is celebrating 55
years of innovation. Offering turnkey PC-driven solutions up to 40
GHz in the field of microwave and RF signal generators and signal
analysis. |
|
 |
Comtest designs, builds, and maintains
worry-free, compliant EMC and Antenna test chambers and RF-Shielded
Rooms. As a family business for 38 years, Comtest likes to
focus on the human factor of technology. They believe that great
technological solutions only work if they enable the people who use
them to be successful at what they want to achieve. Comtest
is committed to creating chamber solutions that will fast-track your
products to your market without compromising on high-quality output. |
|
 |
Elite RF specializes in solid-state RF and
microwave power amplification technology with a strong emphasis on
customer satisfaction. Utilizing their in-house team of RF
engineering experts and advanced quality-controlled production
facility, they offer robust RF amplifiers up to 40GHz and 100kW of
power. From custom requirements to off-the-shelf availability,
Elite RF collaborates with their customers to offer a
cost-effective amplifier with industry leading warranty. |
|
 |
GS Test Equipment buys, sells, repairs, and
rents Test and Measurement Equipment from many of the industry's
leading manufacturers. |
|
 |
Hasco, Inc. Component
Distributors is a supplier of RF & microwave distributor for SSI
Cable Assemblies, as well as various other components, including
attenuators, terminations, DC blocks, directional couplers,
power dividers, waveguide assemblies and much more. |
|
 |
Integra Technologies, because every dB
counts! If you’re striving for absolute
best-in-class output power and optimized thermal and electrical
efficiency from your next high-power amplifier (HPA), Integra
is committed to resolving these, and any of your other RF power
amplification challenges. Integra can support your
current UHF through X-band radar system applications, as well as
any legacy programs and custom design requirements you may have. |
|
 |
Krytar specializes in the manufacture of ultra
broadband microwave components and test equipment for both
commercial and military applications. The KRYTAR product line
includes directional couplers, directional detectors, 3 dB
hybrids, MLDD power dividers, detectors, terminations,
coaxial adapters and power meters. Products cover the DC to
110 GHz frequency range. |
|

AL, GA, MS, NC, SC & TN Only |
Narda-MITEQ is the recognized leader in the Microwave & RF
industry, offering a broad range of passive/active components
and subsystems, including amplifiers, mixers,
oscillators/synthesizers, couplers, power dividers, fiber
optics, PIN diode control products, waveguide, and double-ridge
waveguide products. They also offer Ka-Band SATCOM solutions for satellite
communications, military systems and microwave
telecommunications, with capabilities up to 50 GHz. |
|
 |
MBT (Massachusetts Bay Technologies) manufactures
tuning varactors, step recovery
diodes, noise, PIN, high-power PIN, limiter, point contact, Schottky
mixer/detector diodes, zero bias detectors, MIS/MNS chip capacitors,
binary chip capacitors, quartz spiral
inductors, silicon resistor chips, and Alumina/AlN attenuator
pads. |
|
 |
Micro Lambda Wireless is the World's largest independent supplier of YIG
components. Products include: YIG oscillators, YIG band
pass & band reject filters, frequency multipliers, phased locked
sources and frequency synthesizers. |
|
 |
MTI Milliren manufactures a wide variety of
crystal oscillators (OCXO's,
TCXO's and VCXO's) for military, commercial, space and ground
applications. Also offering phase locked loop
synthesizers, a Hi-Rel dual output space clock, and GPS
disciplined oscillators. |
|
 |
NoiseKen specializes in pulsed EMI
simulation. Since 1975, Noise Laboratory has been focused on
immunity test equipment and related solutions. Their product lines
include various types of immunity test equipment ranging from those
conforming to IEC 61000-4 series standards, other international or
national immunity standards, and even to customer's in-house test
standards. Their products & services include Generators for ESD,
Fast Transient/Burst, Impulse, Interference, and Lightning, as well
as Test Laboratories for EMC/ESD and more. |
|
 |
Passive
Plus Inc. (PPI) is a manufacturer of High-Q multi-layer
ceramic capacitors. They're known for their outstanding customer
service, high quality product line, competitive pricing, and
quick delivery times. High-Q/Low ESR Capacitors are available in
multiple case sizes, dielectrics and various terminations, which
include ROHS compliant and Non-Magnetic finishes. High-Q/Low ESR
Design Kits are also available, with over 40 kits available in
stock, in 0201, 0402, 0505, 0603, 0805 and 1111 case sizes. The
PPI Engineering Staff is available to support your technical and
design needs, review and discuss technical data and circuit
models, and make product recommendations. |
|
 |
REXGEAR is your one-stop shop for automotive, new energy,
battery, and testing lab industries, from testing power supplies,
regenerative power systems, battery cyclers, environmental testing
chambers, EMC chambers and more. REXGEAR's main priority is
customer satisfaction, delivering high quality products with superior support and service. |
|
 |
Rodelco Electronics Corp. supplies RF and microwave
hardware used in critical military and aerospace applications.
Flexible microwave solutions for sources, synthesizers, converters,
receivers, integrated microwave assemblies, control components
(phase shifters, PIN diode switches and attenuators) and amplifiers. |
|
 |
Signal Microwave's primary mission is to create solutions
for the Signal Integrity/High Speed Digital market. Their
manufacturing facility is moving beyond the technology developed by
traditional microwave connector manufacturers to create innovative
new connector and PC board products. All products are fabricated and
assembled in the USA and France using military grade materials and
processes. |
|
 |
SSI Cable manufactures stainless steel, copper and aluminum semi rigid cables with
soldered or welded connector joints. Also available are
flexible, cryogenic and phase-matched cable assemblies, delay
lines and wire harnesses. |
|
 |
Tagore offers innovative solutions
based on Gallium Nitride-on-Silicon (GaN-on-Si), Gallium Nitride (GaN)-on-silicon
carbide (SiC) and Gallium Arsenide technologies. Leveraging wide
bandgap capabilities, their proprietary technologies significantly
reduce complexity, size, and power consumption in a wide variety
from 5G infrastructure to consumer, automotive, and defense and
public safety applications. |
|
 |
Telonic Berkeley (TB) produces
standard and custom high-quality passband, lowpass, highpass and
bandstop filters, as well as diplexers, multiplexers and filter
banks, for use in radar, electronic warfare systems,
telecommunications, satellites and other applications. TB
also offers an extensive line of precision rotary step attenuators,
as well as a broad range of tunable filters, covering the 8 MHz to 4
GHz frequency band. |
|
|